How to Make a DIY Glue Gun Holder

If you do any crafting at all, a glue gun is most likely a tool that you own.  Glue guns come with a built-in metal stand that I’ve found doesn’t work well; It’s annoying to be in the middle of a craft project using a glue gun that won’t stay upright.  A few years ago I found the solution to my problem:  I made a DIY glue gun holder that works like a charm to keep my glue gun upright while I am crafting.

Learn how to make a glue gun holder. Get the step-by-step directions at virginiasweetpea.com.

 

I’m joining my Power Tool Challenge Team girls today to share projects that you can make using one board.  I actually made this glue gun holder in 2013 and thought that I’d share it again for this challenge since I find it to be so useful.Make a glue gun holder. Get the tutorial at virginiasweetpea.com.

This was one of my first woodworking projects and Mr. SP patiently helped me with it.  I got the idea from One Project Closer and followed their directions.

 

Here’s a recap of my version:

1.  I started by cutting pieces of wood to a length that worked with my glue gun and a tile that I had on-hand.  (Two pieces of wood are shown because I made two glue gun holders.)

2.  A piece of wood was cut for the glue gun holder with an angle on one end.  Draw a line vertically down this piece to mark where the “U” will go to hold the glue gun.

3.  The bottom of the U for the glue gun holder was made with a forstner bit.

4.  Cut along the lines with a jigsaw to complete the U.  (I used my granddad’s vintage band saw!)

How to Make a Glue Gun Holder

 

5.  All of the pieces were sanded smooth.

6.  A template for routing was made by drawing a center line down a piece of luan and then tracing the tile on the luan.

7.  The template was completed with a band saw.  (This is a modern one!)

8.  Use a router to route out a recessed place for the tile and then drill a hole so that the tile can easily come out for cleaning.  The angled piece to hold the glue gun was first glued in place and when dry was screwed from the bottom to be sure that it was secure.

How to Make a Glue Gun Holder

 

9.  Paint the glue gun holder and then it is ready to be used.

Glue Gun Holder - Ready to Paint

 

Can you believe that this glue gun holder has been used for almost 3 1/2 years?  All I had to do before I took this picture was to clean the dried glue off of the tile with a razor blade and then remove the glue residue with acetone.

Make your own glue gun holder. This project is super handy for any crafter.

 

I can’t tell you how handy I find my glue gun holder.  It’s great that the holder keeps my glue gun upright and the tile catches all of the messy glue drips.

Make your own glue gun holder. Get the tutorial at virginiasweetpea.com.

 

 

The goal of our monthly power tool challenge is to encourage women to not be afraid to use power tools.  I am one of the least mechanically inclined people that you will ever meet and if I can learn to use power tools, you can as well!

 

Each month our team has a theme for our challenge and I really enjoy coming up with a project that is both fun to make and useful.  Here are the projects that I’ve shared since we started this monthly challenge a year ago:

Back to School:  How to Use a Jigsaw to Make a Wooden Sign

Fall:  DIY Wood Clock

Frightful:  How to Make a Pierced Wood Candle Holder for Halloween

Organize:  DIY Wood Crate Key Organizer

Home Improvement:  DIY Industrial Paper Towel Holder

Spring:  DIY Baseball Bookends

Repurposed and Upcycled:  DIY Tennis Racket Table

Patio and Porch:  DIY 2×4 Bench

Summer:  DIY Wooden Footstool

Favorite Power Tool Projects:  DIY Bird Feeder

 

Don’t forget to pin this idea!

Pin It Button

Learn how to make a glue gun holder. This is a DIY woodworking project that isn't difficult to make and is super handy for any crafter to own. Get the tutorial to make your own at virginiasweetpea.com.

A one board challenge is a super fun theme. I can’t wait to enjoy all of the projects after school today. Click on the links below to visit each one.

One Board Woodworking Projects
Scroll Saw Wooden Basket by Kim Six Fix

Easy DIY Picture Frames by Domestically Speaking

DIY Wood Letter Jewelry Hanger by Designs By Studio C

Circle Back Kids Chair Plans by Her Tool Belt

Easy Wood Pumpkin Cutout by H2OBungalow

DIY Pizza Bread Board by Refresh Restyle

Small Step Stool by My Repurposed Life

DIY Glue Gun Holder by Virginia Sweet Pea

DIY Wooden Movie Projector by Thrift Diving

Comments

  1. As soon as I saw your project I though no way, this is crazy useful! I have the same little glue gun, although it’s awful looking. I use a metal jar cap to hold mine, it never stays upright and is always a mess when I use it. This is a fabulous project and I love that it’s so easy to make!
    Wendi@H2OBungalow recently posted…Easy DIY Wood Pumpkin Cutout TutorialMy Profile

    • Sweet Pea says:

      Thanks, Wendi! My glue gun is really old and I’m surprised that it looks as good as it does considering how much I use it.

      Paula

  2. Paula,

    That’s an awesome project. Using the tile is brialliant!

    pinned this gem.

    gail
    gail recently posted…Small Step Stool | easy one board projectMy Profile

  3. I so NEED one of these! I am tired of picking glue off my counters! I love your design with the tile!

  4. I SO need to make one of these… yep me too… glue all over my counters.

  5. Hi Paula! This is awesome! I want one of these so bad. I’m going to forward this to my husband. I didn’t bring any tools with me to Martinique, but maybe he can make me one at work on his lunch or something. I’m not even sure I brought a glue gun. I should look for one of those. Thanks for the directions. I’d love for you to share this at our link party on Monday night at 9 eastern time.
    Kathleen recently posted…Who Needs a TribeMy Profile

  6. Paula, just the other day I told Mr. Frugalista that I needed something to hold my hot glue gun. This is so happening in my house SOON! Thank you for the easy to follow tutorial. Pinned to share and bookmark.
    Marie, The Interior Frugalista recently posted…Guest Feature on Tell Us Tuesday Series (The Painted Drawer)My Profile

  7. I love this glue gun holder! Such an easy project and the perfect accessory for the craft room!
    Cher @ Designs by Studio C recently posted…Build a Greek Key DresserMy Profile

  8. What a great post! I wan using my hot glue gun tonight, cussing it and wishing it had a better way to be held up. Then I stumbled here! Thanks for sharing at Merry Monday! Visiting from http://www.twelveonmain.com

  9. I need one of these desperately in my life! Maybe I’ll make one this winter! 🙂 Would you consider sharing this at our weekly Dishing It & Digging It Link Party? We are live every Sunday @4pm.

    http://www.thestonybrookhouse.com/2016/08/dishing-it-digging-it-link-party-111.html
    Lori Leeper recently posted…Dishing It & Digging It Link Party {111}My Profile

  10. Great idea to save my chalk painted table! Thanks for sharing this with us over at the DI & DI Link Party too, hope you enjoyed it 🙂

Speak Your Mind

*

CommentLuv badge